Search found 96 matches

by skabrock5
Wed Jul 19, 2017 7:31 pm
Forum: Project Gallery
Topic: Its a shame
Replies: 6
Views: 7446

Re: Its a shame

There are lots of interest in the Z cars still. That is probably the exception because of their history here in the USA
by skabrock5
Tue Aug 18, 2015 11:53 am
Forum: Engine and Drivetrain
Topic: problems with oil pressure on a 2tc engine with 3tc crank
Replies: 6
Views: 7078

Re: problems with oil pressure on a 2tc engine with 3tc cran

i read in my corolla book that at idle its supposed to be 4.5
by skabrock5
Mon Jul 20, 2015 6:03 pm
Forum: VENDORS, Shop and service.
Topic: EUROEXPORTINC.COM
Replies: 2
Views: 6222

Re: EUROEXPORTINC.COM

I've bought plenty of parts for my current build. All I need now are pushrods and head studs. They offer two different diameter pushrods and I'm not sure which ones to get (stock size or 3/8").
by skabrock5
Tue Jul 07, 2015 6:52 pm
Forum: Engine and Drivetrain
Topic: EGR Block off plate needed...
Replies: 1
Views: 3202

Re: EGR Block off plate needed...

I used coins and JB Weld for mine.
by skabrock5
Tue Jun 30, 2015 4:02 pm
Forum: Drift and Circle Track
Topic: Norcal Rallycross and Rallysprint
Replies: 1
Views: 4978

Re: Norcal Rallycross and Rallysprint

man that looks fun
by skabrock5
Tue Jun 30, 2015 2:28 pm
Forum: Engine and Drivetrain
Topic: undersized cam bearings
Replies: 6
Views: 6755

Re: undersized cam bearings

Thanks Estebot but I'm in Houston. I ended up using some decent old bearings (#2 thru #5) from a spare block. I used the new Clevite #1 bearing but hit it with 500 grit for clearance and 3hours later it worked. Halleluya! It took a while because I was test fitting it frequently in between sand paper...
by skabrock5
Fri Jun 26, 2015 8:18 pm
Forum: Engine and Drivetrain
Topic: undersized cam bearings
Replies: 6
Views: 6755

Re: undersized cam bearings

my machinist did a terrible job with the cam bearings. they look like total crap. I bought a third set of cam bearings and installed them myself with ease and it took less than an hour. when I went to test fit the cam, BAM, still doesn't fit. So I decided to hit it with 1200 grit paper and WD40 to r...
by skabrock5
Wed Jun 17, 2015 9:21 pm
Forum: New member introduction
Topic: New memeber but not new to 3TC Garage
Replies: 2
Views: 3262

Re: New memeber but not new to 3TC Garage

8-) COOL YO! WELCOME. GOT ANY PICS?