problems with oil pressure on a 2tc engine with 3tc crank
Posted: Tue Aug 18, 2015 3:35 am
hi guys..
i just swap a 2tc on my suzuki sj410, but i'm having a oil pressure issue, when i start the car the pressure just get to 6 psi on idle, when accelerate to 2500rpm get to 22 psi.... i pull up the valve cover and is lubricatin all well... i make some test changing the oil pressure hose, then i change the oil pressure gauge and nothing change the pressure the same... i pull up the engine and check the oil pump and was good, the crank bearing were good to... so i don't know what to do..
when i put the engine all together i put all new, the oil pump, the water pump, the alternator, the starter, pistons, rings and all the bearings...
so i need some help...
sorry for my english a need more practice...
i just swap a 2tc on my suzuki sj410, but i'm having a oil pressure issue, when i start the car the pressure just get to 6 psi on idle, when accelerate to 2500rpm get to 22 psi.... i pull up the valve cover and is lubricatin all well... i make some test changing the oil pressure hose, then i change the oil pressure gauge and nothing change the pressure the same... i pull up the engine and check the oil pump and was good, the crank bearing were good to... so i don't know what to do..
when i put the engine all together i put all new, the oil pump, the water pump, the alternator, the starter, pistons, rings and all the bearings...
so i need some help...
sorry for my english a need more practice...