Re: Questions about putting in a new alternator
Posted: Mon Jul 27, 2015 9:27 pm
Grinded it and it all worked as far as mounting goes.. Just for some reason Im getting about 14V.. Idk if its wiring or what..
I really need to find a wire diagram.. Specificly a list of the fuse box pin #s would be ideal..
I wrote down wire colors instead of use, so when I started getting to the end of replacing all the wire with mostly black, Im pretty sure I have the connectors on the right pins.. just need somewhere to start.
I have an optima red top, I drove to work a few days with the voltage a little high..
The alternator bracket wiggled loose and once the voltage dropped it never came back..
I'm going to tighten the bracket..
Charge battery,
Make sure no wires are hanging out.. Most wires don't go anywhere.. Need a diagram to eliminate some dead ends.
I really need to find a wire diagram.. Specificly a list of the fuse box pin #s would be ideal..
I wrote down wire colors instead of use, so when I started getting to the end of replacing all the wire with mostly black, Im pretty sure I have the connectors on the right pins.. just need somewhere to start.
I have an optima red top, I drove to work a few days with the voltage a little high..
The alternator bracket wiggled loose and once the voltage dropped it never came back..
I'm going to tighten the bracket..
Charge battery,
Make sure no wires are hanging out.. Most wires don't go anywhere.. Need a diagram to eliminate some dead ends.