DIY short stroke convertion

General information for parts interchange and modification.

Moderators: BOBLOOK, AE25, pufito18

BOBLOOK
Posts: 2334
Joined: Wed Jun 19, 2013 7:32 pm
Location: Under a bonned in Netherlands.

Re: DIY short stroke convertion

Post by BOBLOOK » Mon Sep 09, 2013 7:16 pm

I thought the reason why they leave it is the pain needed to demount everything to adjust them :D
The day we learn to think

80Corollin
Posts: 52
Joined: Tue May 13, 2014 11:26 pm
Location: Portland,OR

Re: DIY short stroke convertion

Post by 80Corollin » Mon Oct 26, 2015 5:54 pm

You confused me with the pictures. Can you do a quick write up?


Did you cut too much off?

Then cut the piece you cut off, you cut another 2inches off before re welding it back? :?:

BOBLOOK
Posts: 2334
Joined: Wed Jun 19, 2013 7:32 pm
Location: Under a bonned in Netherlands.

Re: DIY short stroke convertion

Post by BOBLOOK » Mon Oct 26, 2015 6:15 pm

Yes

Length depend on the shock you use

https://www.youtube.com/watch?v=7KWCDDBbpNc
The day we learn to think

Madslammer
Posts: 27
Joined: Wed Jul 17, 2013 4:35 am

Re: DIY short stroke convertion

Post by Madslammer » Wed Jan 27, 2016 4:54 pm

Can you use those Mr2 or Tercel inserts without cutting the struts? use a spacer or something else???
Thanks

BOBLOOK
Posts: 2334
Joined: Wed Jun 19, 2013 7:32 pm
Location: Under a bonned in Netherlands.

Re: DIY short stroke convertion

Post by BOBLOOK » Thu Jan 28, 2016 8:30 pm

Why you want to do that ? longer struds with short shocks the travel length will be short to compensate the damping high i quests
The day we learn to think

Madslammer
Posts: 27
Joined: Wed Jul 17, 2013 4:35 am

Re: DIY short stroke convertion

Post by Madslammer » Fri Jan 29, 2016 7:22 pm

Well, my wagon has one coil cut up front... It just bottoms out too quickly, it has soft ride shocks...
Monroe sensatrack... I don't really like cutting up the struts... Can the strut be cut retaining the stock spring perches... I guess about 1" or 2"? ... Or maybe just a "stiffer"shock???

BOBLOOK
Posts: 2334
Joined: Wed Jun 19, 2013 7:32 pm
Location: Under a bonned in Netherlands.

Re: DIY short stroke convertion

Post by BOBLOOK » Sat Jan 30, 2016 9:25 am

HTS2 Chart.jpg
HTS2 Chart.jpg (39.95 KiB) Viewed 16876 times
IMG_0383.JPG
IMG_0383.JPG (67.62 KiB) Viewed 16876 times
IMG_0383.JPG
IMG_0383.JPG (67.62 KiB) Viewed 16876 times
It will bump even harder since you shortened the travel length by using the short shock.

Are you sure it bump on the shock or the damping rubber ?

Did you cut the bump rubber a bit that give the shock an few inch more travel length
The day we learn to think

novaluke
Posts: 95
Joined: Tue Dec 31, 2013 1:28 pm

Re: DIY short stroke convertion

Post by novaluke » Sun Mar 27, 2016 5:31 am

Hi can any one tell me the lenght of an mr2 rear shock fully open please? Thanks

Post Reply