New member needs help
Moderators: BOBLOOK, AE25, pufito18
-
- Posts: 48
- Joined: Thu Jun 19, 2014 1:32 pm
New member needs help
So I'm a noob here,. Last year I got the Keyes to a 1976 Toyota corolla/Levin TE37 with a nicely built 3tc,. So tell me,. What fun builds can I go with,. Also how do I post pics,?
So far he mentioned
Oversized intake valves
Dual valve springs
2tg dizzy/bottom end
Bored and polished intake/exhaust
Lightened flywheel"cut"
Rebuilt internals
Weber 32/36 "replica:/"
TRD headers
And something about the engine being bigger than the stock ones,?
He worked with toysport in his days,. His names Frank a philipino dude,.
So far he mentioned
Oversized intake valves
Dual valve springs
2tg dizzy/bottom end
Bored and polished intake/exhaust
Lightened flywheel"cut"
Rebuilt internals
Weber 32/36 "replica:/"
TRD headers
And something about the engine being bigger than the stock ones,?
He worked with toysport in his days,. His names Frank a philipino dude,.
-
- Posts: 48
- Joined: Thu Jun 19, 2014 1:32 pm
Re: New member needs help
Btw,. Next I'm locking for a nice head build,. Nice cam for street/highish rev for canyon runs type of thing,.
Thinking of going with brd's rocker arms
And coolant along with higher flow oil pumping run 15w50 with oil cooling setup,. But still have a strong stock radiator,.
Along with ignition and coil for a nice spark,.
Thinking of going with brd's rocker arms
And coolant along with higher flow oil pumping run 15w50 with oil cooling setup,. But still have a strong stock radiator,.
Along with ignition and coil for a nice spark,.
Re: New member needs help
Welcome to 3tcgarage, anything you need please let us know, we are all here for you. Sounds like a nice car please post pics up!!! Mikealikelepimpofpimps wrote:Btw,. Next I'm locking for a nice head build,. Nice cam for street/highish rev for canyon runs type of thing,.
Thinking of going with brd's rocker arms
And coolant along with higher flow oil pumping run 15w50 with oil cooling setup,. But still have a strong stock radiator,.
Along with ignition and coil for a nice spark,.
Tuner, Builder and Racer. Hit me up for all you needs 2/3tc, 3SGTE or 2RZ custom fabbed parts.
Paypal luzunaris99@gmail.com
Paypal luzunaris99@gmail.com
-
- Posts: 48
- Joined: Thu Jun 19, 2014 1:32 pm
Re: New member needs help
I need to make a photobucket but here are a few I found on Google, I took the top pic the other I happened to stumble across,. Same car btw
Here's a rear shot at the K1 car meet DSport mag held April 2013,. Had the fender repainted and inside the car since I didn't have the hardware at the time to put it back on,.
And a lil review by some guy who I guess liked the Levin,.
http://timscribbles.com/2013/04/10/dsport-meetup/
Here's a rear shot at the K1 car meet DSport mag held April 2013,. Had the fender repainted and inside the car since I didn't have the hardware at the time to put it back on,.
And a lil review by some guy who I guess liked the Levin,.
http://timscribbles.com/2013/04/10/dsport-meetup/
Re: New member needs help
love the look and very clean
Tuner, Builder and Racer. Hit me up for all you needs 2/3tc, 3SGTE or 2RZ custom fabbed parts.
Paypal luzunaris99@gmail.com
Paypal luzunaris99@gmail.com
-
- Posts: 48
- Joined: Thu Jun 19, 2014 1:32 pm
Re: New member needs help
I'll post some interior and most of all some engine bay shots along with underneath her skirt it's mated with a 85 gts T50 throughout the rear end with a single piece drive shaft,.
-
- Posts: 48
- Joined: Thu Jun 19, 2014 1:32 pm
Re: New member needs help
So my question is from who can I find a nice cam to match my driving needs,? And what would have to be swapped to match up with its demands,?