help with starting my car. haltech f10x

[mallito1.8]

I swapped my car from Webbers to Fi turbo. I had the injector wires wired wrong and it turned on but it would flood the car running very rich and now I got the wires on correct it won't start. I was told that maybe because I don't have the radiator installed yet and the temp sensor is not reading correctly that it's flooding my car. And I don't know how to compensate for running rich. Any suggestions would be great. Thanks

[ridin4life]

mailto wat size injectors u have? what trigger setup u running?i still have my f10 I have the factory base map and one for 550cc and one for 1000cc

[BOBLOOK]

Read those features in the manual for cold start setting

Post Start Temp Limit
Fuel Priming Map
Cold Cranking
Post Start Enrichment

Manual

[RYSO]

Bro, you need to let us know more so we can help.

Like I said in the other post, you don't need a CTS to start the engine. Should start without one but might run a bit rough until it reaches operating temps.
You have another problem there.

RYSO.

[mallito1.8]

1200cc injectors 75 mm throttle aero motive fuel pump 1000 aero motive regulator stock dizzy welded locked msd ignition _10 fuel line in 8 return and I have to put return line on top of tank it's in the back right now and I think that's why it's flooding .but the issue is I don't know how to raise or lower fuel or for start up like what temp to use being up north it's cold up here now. Any decent tuner up this way ? Around mass or near. Thanks

[mallito1.8]

If you look me up in another post you can see a pic of my set up oh and t66 turbo

[BOBLOOK]

You can post some screen snap shot pictures of you setting so we can serve you assistantsy

I use quick screen capture software

[mallito1.8]

You can post some screen snap shot pictures of you setting so we can serve you assistantsy

I use quick screen capture software

You mean for pics ?

[mallito1.8]

2n0rlhv.jpg (175.64 KiB) Viewed 11846 times

[mallito1.8]

2n0rlhv.jpg

Wow with my new phone it was easy