Gauge

Here's where you post EFI and TURBO conversion, configurations, and questions related.

Moderators: BOBLOOK, AE25, pufito18

Post Reply
User avatar
toyotero2dend
Posts: 495
Joined: Sat Jun 22, 2013 4:54 am
Location: New York

Gauge

Post by toyotero2dend »

Hey guys where should I tap into,, to get the boost gauge to work on my blow through set up?? Lil confuse here :( don't know if I should tap into the intake mani or into the bonnet?? Was gonna do it between the turbo & the Boost knob but was reading that it does not give an accurate reading??
Tate Quieto
Toyota1515
Posts: 784
Joined: Fri Aug 09, 2013 2:59 am

Re: Gauge

Post by Toyota1515 »

toyotero2dend wrote:Hey guys where should I tap into,, to get the boost gauge to work on my blow through set up?? Lil confuse here :( don't know if I should tap into the intake mani or into the bonnet?? Was gonna do it between the turbo & the Boost knob but was reading that it does not give an accurate reading??
Got to be betwine the Carb/throttle body and head, on the intake manifold, one of the carb vacuum port will work just fine.
SF5 FOZZY
User avatar
toyotero2dend
Posts: 495
Joined: Sat Jun 22, 2013 4:54 am
Location: New York

Re: Gauge

Post by toyotero2dend »

thanks alot for the info toyota there is a vaccum port on the carb. if not i will tee it to the bov hose thats coming out of the intake mani
Tate Quieto
Post Reply