Dummy distributor

[Datzilla]

Looking to put a crank trigger wheel in use, what's the best option for the distributor. I was thinking take the rotor cap off with the trigger and using a cut off wheel , cut it flush and make a cover plate to go where the cap was. The shaft is locked in place so it can still turn the oil pump. Right? Thanks in advanced!

[NME308]

Assuming you will be using waste spark that should work well!

I have created a cam sync sensor with mine but cannot yet confirm its success as I have not yet reached fire up stage...

Cheers,
Jason

[Toyota1515]

Assuming you will be using waste spark that should work well!

I have created a cam sync sensor with mine but cannot yet confirm its success as I have not yet reached fire up stage...

Cheers,
Jason

It would work Jason as long as it is indexed ti the #1 it will work.

[BOBLOOK]

[Datzilla]

Cool, thanks ! Boblook what kind of fab skills did it take to make? Pretty easy?

[BOBLOOK]

Thats not my Art so can't tell you build is Sunray ( previous board moderator) hope he is fine ?

I would pickup an old dizzy and start improvising sometime you handier then you expect

Cool, thanks ! Boblook what kind of fab skills did it take to make? Pretty easy?

[Datzilla]

I'm on it, if I had a full set of tools I could be dangerous! Haha!

[BOBLOOK]

I'm on it, if I had a full set of tools I could be dangerous! Haha!