3tc -> T50 manual swap car wont start

Webers, Cam selection and Ignition upgrades.

Moderators: BOBLOOK, AE25, pufito18

Post Reply
User avatar
deaconfrost
Posts: 23
Joined: Thu Feb 27, 2014 11:50 pm
Location: victoria B.C. Canada
Contact:

3tc -> T50 manual swap car wont start

Post by deaconfrost »

as the title suggests I completed a t50 manual transmission swap in my 81 corolla wagon, all components are in correctly, but the engine wont crank, i looped the bottom to top right wire that comes out of the old auto tranny to loop the neutral safety and i checked all wires going to the starter, but it still wont crank. any tips or ideas as to why it wont go. I have racked my brain and searched but to no avail.

help is appreciated, thank you
BOBLOOK
Posts: 2334
Joined: Wed Jun 19, 2013 7:32 pm
Location: Under a bonned in Netherlands.

Re: 3tc -> T50 manual swap car wont start

Post by BOBLOOK »

You will have to bridge the neutral/park safety wire otherwise the voltage won't run to the starter . You can check on the diagram for the correct wire !
The day we learn to think
Post Reply