Need help with pushrods

Webers, Cam selection and Ignition upgrades.

Moderators: BOBLOOK, AE25, pufito18

Post Reply
sw20
Posts: 1
Joined: Tue Dec 09, 2014 8:17 am

Need help with pushrods

Post by sw20 »

I have a 85 Corolla with a 2t motor has after market pistons and rods with cams. Not sure what cams but pistons is bored to 89mm.
(The problem)The previous owner told me that he had a problem with the pushrods bending. Now this is were im clueless lol this is my first time playing with this motor so just need some help on what I should look at before I start to buy parts for the motor. Thanks
BOBLOOK
Posts: 2334
Joined: Wed Jun 19, 2013 7:32 pm
Location: Under a bonned in Netherlands.

Re: Need help with pushrods

Post by BOBLOOK »

The day we learn to think
Estebot
Posts: 52
Joined: Thu Jun 20, 2013 10:41 pm
Location: Reno, nevada

Re: Need help with pushrods

Post by Estebot »

The valves may be contacting the Pistons. I always check my valve to piston clearance with clay on the piston and no valve lash before running an engine
Post Reply