Page 1 of 2

3TGTE37

Posted: Tue Dec 01, 2015 12:01 am
by chesmari
This car has had a very dramatic life in my hands. I've had it for about 10 years, been working on it for about 9. Needless to say, all the heartaches have gone away as soon as I was able to start it. A few more things to button up and it'll be roadworthy. Some of you know my story.

Name: Ryan

Car: 1975 TE37 SR5 started Pearl White now British Racing Green

Motor & Driveline: SDS EFI 3TGTEU w/ 440cc 7MGTE injectors, front facing intake manifold, T3/4 turbo and FMIC, Supra W58 w/ IS300 short shifter, Ford 8.8 with 3.73 gear and LSD, 3 inch mandrel bent exhaust with Magnaflow muffler.

Suspension & Brakes: AE86 front struts, shortened with MR2 SW20 5 way adjustable Tokico shocks, coilovers and adjustable T3 camber plates and NRCA. Straightened leafsprings with 8 way adjustable TRD blues. FC3S Rx7 4 piston calipers up front.

Wheels & Tires: Enkei92 15 x 7 Kumho 195 50R15

Interior: Acura/Honda Integra seats, VW Rabbit center console. Re-vinyl was needed for the dash. All plastics were refreshed with vinyl paint.

Body: Refreshed entire chassis with new metal and new color.

Other: Replaced entire wiring loom with a brand new universal harness. Steering is upgraded as well with a Starlet manual rack & pinion, and CelicaSupra column with tilt. Air Conditioning is online. All chrome parts are refreshed and polished

When I bought it from Phoenix, AZ. Notice the 2 other Yotas I owned at that time.

Image

1st and only time I had it out for JCCS.

Image

It suffered an unfortunate incident in the hands of a tow truck driver and damaged the passenger side fender, fender flare and control arm. It sat at a friends house under the Las Vegas sun for about a year after moving before I had the funds to tow it to Southern California. I was able to find and replace the damaged parts and slowly worked on it, crossing out the check list one by one.

When it was time to tune the engine, I hit a snag as the flywheel bolts were sheared and it again sat in idle for almost a year.

Image

Today however is a great day:

Image

A few times I have contemplated on giving it up, thank you to my wonderful wife for understanding that I need to work on it til it's all done.

I hope to give updates as regularly as possible.

Ryan

Re: 3TGTE37

Posted: Mon Dec 21, 2015 7:53 pm
by BOBLOOK
caps014.jpg
caps014.jpg (75.66 KiB) Viewed 18186 times
Wow Ryan time for an pinned crank

Re: 3TGTE37

Posted: Sun Dec 27, 2015 7:23 pm
by chesmari
BOBLOOK wrote:
caps014.jpg
Wow Ryan time for an pinned crank
I will when the time comes to rebuild the engine.....


Ryan

Re: 3TGTE37

Posted: Mon Dec 28, 2015 5:57 pm
by BOBLOOK
Okay awesome ! kept posting

Re: 3TGTE37

Posted: Thu May 04, 2017 2:02 am
by chesmari
I tidied the engine bay a bit. Replaced the radiator with a proper fitting piece (they are all over the place now), fixed the turbo, replaced the swirl pot. Just need to put it back together, registration time and final tune.... no smog, no problem =)
Image


Ryan

Re: 3TGTE37

Posted: Thu May 11, 2017 3:05 pm
by chesmari

Re: 3TGTE37

Posted: Sat May 13, 2017 4:59 am
by Sukimonster
Wow so clean. I can only wish my project would hit this stage one day :cry: Could you tour us with the interior? Kinda curious what kind of Volkswagen center console you put in. I've been searching all kinds of cars at the junkyard to see any compatible interior that could at least provide some cup holders lol.

Re: 3TGTE37

Posted: Mon May 15, 2017 4:27 pm
by chesmari
Sukimonster wrote:Wow so clean. I can only wish my project would hit this stage one day :cry: Could you tour us with the interior? Kinda curious what kind of Volkswagen center console you put in. I've been searching all kinds of cars at the junkyard to see any compatible interior that could at least provide some cup holders lol.

It's this one:

Image


VW Console


I had to trim it to fit. I just took out the interior out to clean up some issues I wasn't happy with. I'll take a photo of it when I put it back. I guess I'm not done after all. :roll: :roll: :roll:


Ryan

Re: 3TGTE37

Posted: Sun May 21, 2017 5:26 pm
by Centermass
Beautiful car Ryan and kudos to your wife for supporting your endeavors. Love the Nevada tags!

Re: 3TGTE37

Posted: Wed Jul 21, 2021 4:13 pm
by chesmari
Wow, it's been a while since I've updated this.

This is the first car I've ever done as a project. Needless to say, it took me a WHOLE LOT longer than I wanted to. I definitely bit more than I can chew. I did however, sucked it up and made it happen.

The car was running, untuned, with 7 psi of boost and it was ok, until one of the rings broke and an injector failed. Well, I tried rebuilding it the first time with stock parts, I couldn't get it to work, I got pissed and decided to upgrade some parts. :lol:

So these are the new parts:

Wiseco 87mm pistons
Eagle Rods
Reground 2TG Cams 288/10.8 in/ex
ARP Head studs
Moroso Windage tray
SR20DET Manifold
TIal External wastegate
750cc RC Racing Injectors
Turbonetics Manual Boost controller
Toyo R888R tires :)

Image

Image

Image

Image

Image

Image

Image

Videos:

https://www.facebook.com/groups/1493720 ... 184164833/


I recently just increased the boost to 10 psi. I will post a video of it soon. So far, i have only tuned in on the road with 3 psi boost on the spring, will dyno tune in the near future.


Ryan